 |
 |
聯系人：肖先生
手機：13549213581
電話：0769-87795123
傳真：0769-87795123
Q Q：15397858
|
|
|
|
 |
|
PFA 美國杜邦 PFA PFA 951HP Plus塑料是東莞市雙幫塑膠原料有限公司常年銷售的塑料，因為塑料價格行情每天都有新變化前天的報價不等于今天的報價。本公司銷售的所有原料保證是原廠原包,隨料可以提供生產廠商提供的物性表、SGS報告，COA原料出廠報告,提供原料注塑加工工程中可能出現的各種異常現象解決方法，塑料牌號太多，本網站沒有提供的本公司也有代理，詳情請咨詢本公司相關業務人員0769-87795123
13549213581肖生
抗溶解性, 流動性低, 高 ESCR（抗應力裂紋）, 煙釋放低,耐化學性, FDA食品接觸, 良好的電氣性能, 耐氣候, 襯里, 管道, 液體處理, 吹塑成型, 樹脂傳遞成型, 擠出, 壓縮模塑, 注射成型
Teflon® PFA 951HP Plus
全氟烷氧基
DuPont Fluoropolymers
Technical Data
產品說明
For inventory control purposes product name may be followed by an X.
Products labeled PFA 951HP Plus and PFA 951HP Plus X are equivalent and all information in this document is applicable to both.
Typical Application
With permeation resistance that is up to 60% greater than standard PFA, DuPont™ Teflon ® PFA 951HP Plus is designed for applications where reduced chemical permeation, resistance to stress-cracking, and surface smoothness are critical to reducing contamination and protecting process yields. Applications for Teflon ® PFA 951HP Plus include fluid handling components for high-performance chemical delivery systems, as well as tubing, unsupported pipe linings for the production of ultra-pure chemicals, and semiconductor components where purity in the parts-per-billion range is needed.
Description
DuPont™ Teflon ® PFA 951HP Plus is a premium fluoroplastic resin available in pellet form. Teflon ® PFA 951HP Plus possesses the same exceptional chemical resistance, high purity, and protection against ionic contamination as Teflon ® PFA HP grades with the added benefits of improved flex life and chemical stress-crack resistance. Teflon ® PFA 951HP Plus has unmatched HCl permeation resistance, and is also 45% less permeable to nitrogen than other PFAs (permeation by nitrogen is a general indication of the rate of permeation by other molecules).
Additionally, the improved flex life and chemical resistance will reduce the cost of ownership of high purity fluid handling systems by reducing downtime caused by mechanical or chemical stresses. Parts molded with Teflon ® PFA 951HP Plus have an xceptionally smooth finish, which can further help prevent buildup of microbial contamination in water handling systems. Table 1 shows the typical property data for Teflon ® PFA 951HP Plus.
Teflon ® PFA 951HP Plus is a relatively low melt flow rate (typical MFR of 2), special purpose resin with the lowest level of extractables designed to meet ultra-high purity requirements. The enhanced resistance to environmental stress-cracking makes Teflon ® PFA 951HP Plus a preferred resin when extended service is required in hostile environments involving chemical, thermal, and mechanical stress. Additionally, the enhanced purity of Teflon ® PFA 951HP Plus makes it suitable for applications that require improved color, lower extractable fluorides, and freedom from other foreign materials. This product contains no additives and is designed for hostile chemical environments where purity in the parts-per-billion range is needed. Examples are in semiconductor manufacture, fluid handling systems for industry or life sciences, and instrumentation for precise measurements of fluid systems. Teflon ® PFA 951HP Plus combines the processing ease of conventional thermoplastics with the properties similar to those of polytetrafluoroethylene.
With Teflon ® PFA 951HP Plus, components can last longer under dynamic loads and resist damage caused by ozonated fluids nd fluorosurfactants. Combined with exceptional chemical, permeation, and stress-crack resistance, this durability leads to a reduced cost of ownership. The high purity and fully fluorinated molecule end groups of Teflon ® PFA 951HP Plus can reduce contamination to protect process yields.
Properly processed products made from neat Teflon ® PFA 951HP Plus resin provide the superior properties characteristic of fluoroplastic resins: chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption, low flammability, performance at temperature extremes, and excellent weather resistance.
In a flame situation, products of Teflon ® PFA 951HP Plus resist ignition and do not promote flame spread. When ignited by flame from other sources, their contribution of heat is very small and added at a slow rate with very little smoke.
Teflon ® PFA 951HP Plus meets the requirements of ASTM D 2116-07(2012), Type V
總體
材料狀態 • 已商用：當前有效
資料 1 • Technical Datasheet (English)
搜索 UL 黃卡 • DuPont Fluoropolymers
• Teflon® PFA
供貨地區 • 北美洲 • 歐洲
• 拉丁美洲 • 亞太地區
• High Purity • 流動性低 • 韌性良好
• 低摩擦系數 • 耐化學性良好
• 食品接觸的合規性
性能特點 • 高 ESCR（抗應力裂紋） • 耐氣候影響性能良好
• 吸潮性差
• 良好的電氣性能 • 耐熱性，中等
• 煙釋放低
• 良好的柔韌性 • 熱穩定性，良好
用途 • 襯里 • 管道 • 液體處理
機構評級 • FDA 未評級
形式 • 顆粒料
加工方法 • 吹塑成型 • 樹脂傳遞成型 • 注射成型
• 擠出 • 壓縮模塑
Teflon® PFA 951HP Plus
全氟烷氧基
DuPont Fluoropolymers
物理性能 額定值單位制 測試方法
比重 2.15g/cm³ ASTM D792
熔流率 (372°C/5.0 kg) 2.0g/10 min ASTM D3307
ISO 12086
吸水率 (24 hr) < 0.030% ASTM D570
機械性能 額定值單位制 測試方法
抗張強度 ASTM D3307
23°C 28.0MPa ISO 12086
200°C 15.0MPa
伸長率 ASTM D3307
斷裂, 23°C 290% ISO 12086
斷裂, 200°C 450%
彎曲模量 ASTM D790
23°C 600MPa ISO 178
200°C 55.0MPa
硬度 額定值單位制 測試方法
硬度計硬度 (邵氏 D) 55 ASTM D2240
ISO 868
熱性能 額定值單位制 測試方法
熔融溫度 315°C ASTM D4591
電氣性能 額定值單位制 測試方法
體積電阻率 1.0E+18ohm•cm ASTM D257
ISO 1325
介電強度
0.250 mm 3 80kV/mm ASTM D149
0.250 mm 80kV/mm IEC 60243-1
介電常數 (1 MHz) 2.03 ASTM D150
IEC 60250
耗散因數 (1 MHz) < 0.00020 ASTM D150
IEC 60250
可燃性 額定值單位制 測試方法
UL 阻燃等級 4 V-0 UL 94
極限氧指數 > 95% ASTM D2863
ISO 4589-2
補充信息 額定值單位制 測試方法
Critical Shear Rate (372°C) 12.0sec^-1
MIT Folding Endurance 5 (200.0 µm) 1.8E+6Cycles ASTM D2176
Weather and Chemical Resistance: Outstanding
東莞市雙幫塑膠原料有限公司大量銷售塑料PFA PFA 951HP Plus因為塑料價格行情每天都有新的變化前天的報價不等于今天的報價。如果需要新的價格請電：13549213581，肖生。
|
| |
|
