|
PFA 美國杜邦PFA PFA TE9724塑料是東莞市雙幫塑膠原料有限公司常年銷售的塑料，因?yàn)樗芰蟽r(jià)格行情每天都有新變化前天的報價不等于今天的報價。本公司銷售的所有原料保證是原廠原包,隨料可以提供生產廠商提供的物性表、SGS報告，COA原料出廠報告,提供原料注塑加工工程中可能出現的各種異常現象解決方法，塑料牌號太多，本網站沒有提供的本公司也有代理，詳情請咨詢本公司相關業務人員0769-87795123
13549213581肖生
低摩擦系數, 流動性高, 耐化學性, 良好的電氣性能, 韌性良好, 良好的熔體強度, 耐氣候, 薄膜, 復合物, 管道, 型材, 樹脂傳遞成型, 擠出, 壓縮模塑, 注射成型
Teflon® PFA TE9724
全氟烷氧基
DuPont Fluoropolymers
Technical Data
產品說明
For inventory control purposes product name may be followed by an X.
Products labeled PFA TE9724 and PFA TE9724 X are equivalent and all information in this document is applicable to both.
Typical Application
DuPont™ Teflon ® PFA TE9724 is an ideal resin for applications involving compounding and compression molding, as well as extruded tubing and other profiles for hose, electrical insulators, and sleeving; industrial film and products made from film; and injection or compression molded articles requiring superior electrical, chemical, and thermal properties. Teflon ® PFA TE9724 offers a slightly higher melt flow rate than Teflon ® PFA TE9725, providing greater processing ease.
Description
DuPont™ Teflon ® PFA TE9724 is a general-purpose fluoroplastic resin available as loosely compacted fluff. It is intended for use in special application processes in consultation with DuPont. Compared with other grades of Teflon ® PFA, its most unique features are a relatively high flow rate and properties that make it suitable for a variety of processes and demanding end uses, especially compounding and compression molding. Table 1 shows the typical property data for Teflon ® PFA TE9724.
Teflon ® PFA TE9724 is used when traditional extrusion and molding processes are required for producing products with the superior properties of a fluoroplastic resin. Compared to other thermoplastics, the high melt strength and thermal stability of Teflon ® PFA TE9724 can be used to improve processing rates. Compared with other thermoplastics, Teflon ® PFA TE9724 provides a superior balance and level of end-use properties at high service temperatures. Teflon ® PFA TE9724 combines the processing ease of conventional thermoplastics with many properties similar to those of polytetrafluoroethylene.
Properly processed products made from neat Teflon ® PFA TE9724 resin provide the superior properties characteristic of fluoroplastic resins: chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption, low flammability, performance at temperature extremes and excellent weather resistance.
In a flame situation, products of Teflon ® PFA TE9724 resist ignition and do not promote flame spread. When ignited by flame from other sources, their contribution of heat is very small and added at a slow rate with very little smoke.
Teflon ® PFA TE9724 meets the requirements of ASTM D3307, Type I
總體
材料狀態 • 已商用：當前有效
資料 1 • Technical Datasheet (English)
搜索 UL 黃卡 • DuPont Fluoropolymers
• Teflon® PFA
供貨地區 • 北美洲 • 歐洲
• 拉丁美洲 • 亞太地區
• 低摩擦系數 • 流動性高 • 熱穩定性，良好
性能特點 • 良好的電氣性能 • 耐化學性良好 • 韌性良好
• 良好的熔體強度 • 耐氣候影響性能良好 • 吸潮性差
• 良好的柔韌性 • 耐熱性，中等 • 煙釋放，低
• 薄膜 • 復合物 • 型材
用途 • 襯里 • 管道
• 電氣/電子應用領域 • 管道
形式 • Fluff
加工方法 • 復合 • 樹脂傳遞成型 • 注射成型
• 擠出 • 壓縮模塑
物理性能 額定值單位制 測試方法
比重 2.14g/cm³ ASTM D792
熔流率 (372°C/5.0 kg) 12g/10 min ASTM D3307
ISO 12086
吸水率 (24 hr) < 0.030% ASTM D570
機械性能 額定值單位制 測試方法
抗張強度 (23°C) 25.0MPa ASTM D3307
ISO 12086
伸長率 (斷裂, 23°C) 300% ASTM D3307
ISO 12086
Teflon® PFA TE9724
全氟烷氧基
DuPont Fluoropolymers
機械性能 額定值單位制 測試方法
彎曲模量 (23°C) 590MPa ASTM D790
ISO 178
硬度 額定值單位制 測試方法
硬度計硬度 (邵氏 D) 55 ASTM D2240
ISO 868
熱性能 額定值單位制 測試方法
熔融溫度 305°C ASTM D4591
電氣性能 額定值單位制 測試方法
體積電阻率 1.0E+18ohm•cm ASTM D257
ISO 1325
介電強度
0.250 mm 3 80kV/mm ASTM D149
0.250 mm 80kV/mm IEC 60243-1
介電常數 (1 MHz) 2.03 ASTM D150
IEC 60250
耗散因數 (1 MHz) < 0.00020 ASTM D150
IEC 60250
可燃性 額定值單位制 測試方法
UL 阻燃等級 4 V-0 UL 94
極限氧指數 > 95% ASTM D2863
ISO 4589-2
補充信息 額定值單位制 測試方法
MIT Folding Endurance 5 (200.0 µm) 1.5E+4Cycles ASTM D2176
Weather and Chemical Resistance: Outstanding
東莞市雙幫塑膠原料有限公司大量銷售塑料PFA PFA TE9724因?yàn)樗芰蟽r(jià)格行情每天都有新的變化前天的報價不等于今天的報價。如果需要新的價格請電：13549213581，肖生。
|
